Telephone voltages detected - MicroScanner2 | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  MicroScanner2

Telephone voltages detected - MicroScanner2

Figure 1 below shows that telephone voltage is detected on pair 4, 5.

Length is not shown because the voltage interferes with length measurements.

Figure 1 Telephone Voltages Detected


Warning
The tester is not intended to be connected to active telephone inputs, systems, or equipment, including ISDN devices. Prolonged exposure to the voltages applied by these interfaces may damage the tester.

Author: Adrian Young

Data de criação: 25-2-2014

Última alteração: 25-2-2014

 
 
 
 
Powered By OneLink