Changing the Length Units between Feet and Meters - MicroScanner2 | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  MicroScanner2

Changing the Length Units between Feet and Meters - MicroScanner2

The Length Units for the MicroScanner2 can be changed between feet and meters.

Start this process with the tester in the Off position.
  • Hold down PORT and UP ARROW while turning on the tester.
  • Press MODE to switch between feet and meters.
  • Turn the tester off, and then turn it back on to return to testing mode.

Autor: Fluke Networks

Data de criação: 25-2-2014

Última alteração: 25-2-2014

 
 
 
 
Powered By OneLink