OneTouch AT module killed my FI-7000 FiberInspector™ Pro | Fluke Networks

Base de conhecimento

KB Home   >  Teste de fibra   >  FI-7000 FiberInspector™ Pro

OneTouch AT module killed my FI-7000 FiberInspector™ Pro

If you insert a OneTouch AT module in the back of your FI-7000 (Versiv mainframe), the main frame is turned into an excellent network troubleshooting tool. However, when you remove the OneTouch AT module, the main frame still thinks it is a OneTouch AT and you no longer have the ability to carry out automated fiber inspection.

Putting a DSX-5000, CertiFiber Pro or OptiFiber Pro module in the back will return it to allow automated fiber inspection. If you do not have one of these modules, don't worry.

  • Power off the Versiv main frame
  • Remove the OneTouch AT module
  • Hold down the HOME key.
  • Keep it held down while you power on the mainframe.
  • When you see the screen change from OneTouch AT to Versiv, let go of the HOME key.

Your FI-7000 is now operational again.

Autor: A.Young

Data de criação: 19-8-2014

Última alteração: 19-8-2014

Powered By OneLink