Visual Fault Locator (VFL) Specifications - DTX Compact OTDR Module
Output power*:
316 μw (-5 dBm) ≤ peak power ≥ 1,0 mw (0 dbm)
Comprimento de onda de operação:
650 nm nominal
Spectral width (RMS):
± 3 nm
Modo de saída:
Continuous wave and pulsed mode (2 Hz to 3 Hz blink frequency)
Adaptador do conector:
2,5 mm universal
Segurança do laser:
CDRH da Classe II
Complies with EN60825-1 and EN61010-1 (CE) and CFR21
Visual fault locator (VFL) output with universal fiber connector and protective cap. The connector accepts 2,5 mm ferrules
Never start a test or activate the OUTPUT port or VFL port without first connecting a fiber to the port you will use.
316 μw (-5 dBm) ≤ peak power ≥ 1,0 mw (0 dbm)
Comprimento de onda de operação:
650 nm nominal
Spectral width (RMS):
± 3 nm
Modo de saída:
Continuous wave and pulsed mode (2 Hz to 3 Hz blink frequency)
Adaptador do conector:
2,5 mm universal
Segurança do laser:
CDRH da Classe II
- Into SMF-28 singlemode fiber, continuous wave and pulse modes, SC/UPC connector.
Complies with EN60825-1 and EN61010-1 (CE) and CFR21
Visual fault locator (VFL) output with universal fiber connector and protective cap. The connector accepts 2,5 mm ferrules
Never start a test or activate the OUTPUT port or VFL port without first connecting a fiber to the port you will use.
