Tone Generator - DTX CableAnalyzer
| The tone generator on the tester and smart remote produces a standard 2 kHz tone for locating cables and jacks with a tone probe such as the Fluke Networks IntelliTone probe.
The tone probe detects the toners signal and makes a sound that gets louder as you get closer to the cable or jack transmitting the signal. The tone is generated on pair 1, 2. Obs.: The tone generator does not generate the IntelliTone signal. 1. Attach a twisted pair adapter to the tester or smart remote. 2. Connect the tester or smart remote to the cabling as shown below:
3. To turn on the testers toner press  . 4. To turn off the toner, press again. |
