Output Power - DTX CableAnalyzer | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  CableAnalyzer™ DTX

Output Power - DTX CableAnalyzer

The Output Power of the DTX CableAnalyzer is very small. There is little danger of the DTX CableAnalyzer damaging an active port on a hub/switch.
Output power of DTX depends on frequency. Here are typical values: 

A quick answer (for 1 to 600 MHz) would be "about 0 dBm", or "about 1 milliwatt", or "about .32 VRMS across the pair under test", or "about .9V peak to peak across the pair under test".

Autor: Fluke Networks

Data de criação: 24-2-2014

Última alteração: 24-2-2014

Powered By OneLink