Incompatible test limit, cable or fiber type, or wiremap - DTX Fiber | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  CableAnalyzer™ DTX

Incompatible test limit, cable or fiber type, or wiremap - DTX Fiber

PLEASE UPDATE TO Version 2,78 and LinkWare PC 9,6 to avoid this screen.
 
 
If you see... ...

Incompatible Test Limit Message


... ... .when testing a fiber link, it is probably caused by selecting the wrong fiber type in setup. Version 1,3 will prevent you from selecting the wrong fiber type etc.
 
If you select an application standard such as 1000BASE-SX, you cannot select 50 m or 62,5 m. The length limit for this test depends on the MBW (modal bandwidth) of the fiber you are testing.
 
Go back into the fiber type menu and select a fiber type that has MBW associated with it.
 

Modal Bandwidth Test Message

 
The DTX will now allow you to carry out the test.

Autor: Fluke Networks

Data de criação: 24-2-2014

Última alteração: 24-2-2014

 
 
 
 
Powered By OneLink