Setting the Time and Date - CableIQ | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  CableIQ™

Setting the Time and Date - CableIQ

The time and date are stored with saved Autotests. The time setting uses a 24-hour clock, shown here: Autotest Time and Date
To set the time and date: 
  1. Turn the rotary switch to SETUP.
  2. Press Down Keyto highlight Time / Date; then press Enter Keyor F1 Key.
  3. To select a field to edit, use to highlight the field; then press Enter Keyor .
  4. Use Down KeyUp Keyto change the setting in the selected field; then press Enter Key .


Autor: Fluke Networks

Data de criação: 28-1-2014

Última alteração: 28-1-2014

Powered By OneLink