New OptiFiber® Pro HDR Modules and Version 6.0 Software Extend the Value of Your Versiv™ Investment
Configure your Versiv Download Datasheet OptiFiber Pro information
Flexible Modular Design
Building on a modular design, the Versiv Cabling Certification System is ready for today’s and tomorrow’s requirements. Our new HDR modules and Version 6.0 software are perfect examples. The new modules plug into any Versiv mainframe to test, troubleshoot and document HDR applications supporting outside plant (OSP) back-haul and long-haul services, peer-to-peer (P2P), passive optical network (PON), and fiber-to-the-premises (FTTx) installations. The Version 6.0 software not only supports the new modules, but also provides new features for existing OptiFiber Pro owners.
New Modules for OptiFiber Pro
OFP-200-S (1310/1550 nm) OFP-200-S1490 (1310/1490/1550 nm) OFP-200-S1625 (1310/1550/1625 nm)
With the new Fluke Networks OptiFiber® Pro High Dynamic Range (HDR) Optical Time Domain Reflectometer, Versiv becomes a single solution for applications ranging from FTTx, PON and datacenters to category-rated structured cabling. Versiv users report that its efficient and familiar interface cuts costs by 65% when testing, certifying and maintaining copper and fiber network installations. Features include:
Three new Singlemode Modules (all feature cleanable APC ferrule with removable SC adapter)
OFP-200-S (1310, 1550 nm)
OFP-200-S1490 (1310, 1490, 1550 nm)
OFP-200-S1625 (1310, 1550, 1625 nm)
PON Event Map to Locate and Identify Optical Splitters (2, 4, 8, 16, 32, 64, or 128) for faster PON troubleshooting.
Increased Dynamic Range of 40 dB or greater with double the sampling points (129.000) to find more faults Increased Distance Range for runs of up to 260 km
Version 6.0 Features Benefit New and Current OptiFiber Pro Users
The features below work on both the new OptiFiber Pro HDR OTDR and existing OptiFiber Pro models. Existing users can download the software at no charge by visiting www.flukenetworks.com/support/downloads.
Expert Manual Mode lets operators optimize the instrument’s performance by easily modifying automated settings chosen by the OTDR
Realtime trace with adjustable parameters for faster and simpler troubleshooting
Automated macrobend detection
Span support lets you focus only on the part of the link under analysis*
Add or edit events for more complete documentation*
Next Steps
For more information or to discuss the right module for your application, contact our support team at 1-800-28-FLUKE (1-800-283-5853) or info@flukenetworks.com.
*Available in LinkWare™ PC now - available in Versiv Q1, 2019