Bridge Tap Fault Detection - MicroScanner2 | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  MicroScanner2

Bridge Tap Detected - MicroScanner2

Figure 1 shows a bridge tap detected at about 53.2 m. Only the first bridge tap detected is reported. The distance to a bridge tap is approximate because multiple reflections from the bridge tap interfere with length measurements.




Bridge taps more than 328 ft (100 m) from the tester
or taps less than 16 ft (5 m) long may not be detected.

Figure 1. Bridge Tap Detected

Author: Adrian Young

Creation Date: 2014-02-25

Last Modified: 2014-02-25

Powered By OneLink