Changing Length Units - MicroScanner | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  MicroScanner

Changing Length Units - MicroScanner

MicroScanner will report the length of the cable under test in meters or feet.
To change the currently configured setting to other units 
  • Enter Calibrate menu by pressing On/Off button and MODE button simultaneously
  • Press Mode twice more to toggle between meters and feet for the results displayed
  • Restart MicroScanner to exit the Calibrate menu.
Calibrating MicroScanner to a known length of cable is recommended for ensuring accurate cable readings.

Autor: Fluke Networks

Data de criação: 25-2-2014

Última alteração: 25-2-2014

Powered By OneLink