Calibrating to a specific cable - MicroMapper™ Pro | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  MicroMapper™ Pro

Calibrating to a specific cable - MicroMapper™ Pro

You may calibrate your MicroMapper™ to a specific cable by following these simple steps:

Etapa 1: Connect a good cable of known length between 15m and 100m.

Etapa 2: Press the “SET” button.

Etapa 3: Press “RETURN” until it displays “CAL no”.

Etapa 4: Press the “DOWN ARROW” until “CAL yes” is showing.

Etapa 5: Press “RETURN”.

Etapa 6: Press “SET”.

Etapa 7: Adjust the length to your known value using the “UP” and “DOWN” arrows then press “RETURN”.

Autor: Fluke Networks

Data de criação: 26-2-2014

Última alteração: 26-2-2014

 
 
 
 
Powered By OneLink