Saving Autotest Results - CertiFiber | Fluke Networks

Base de conhecimento

KB Home   >  Teste de fibra   >  CertiFiber®

Saving Autotest Results - CertiFiber

 

The CertiFiber will store 1.000 complete Autotest results in nonvolatile flash memory.
 
All test results can be uploaded to a PC using the LinkWare PC 6,2 software.
 

 

  1. Connect the CertiFibers serial port to the serial port on the PC with the supplied communication cable DB 9 to DB 9 Serial Cable.

     

     
  2. Turn CertiFiber on to display the logo screen.
  3. Press Shift + Escape to display the Setup screen.
  4. Highlight Upload to PC and press F1 (Select).
     
    CertiFiber is now in upload mode.
  5. Open LinkWare software.
  6. Click on File > Import from > CertiFiber. The saved Autotests will be imported into LinkWare software. After import is complete click File > Save As > Name the file click ok to save.
  7. Turn the CertiFiber off when the transfer is complete.

Autor: Fluke Networks

Data de criação: 27-2-2014

Última alteração: 27-2-2014

 
 
 
 
Powered By OneLink