Technical Specifications - MicroMapper™ Pro | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  MicroMapper™ Pro

Technical Specifications - MicroMapper™ Pro

Specifications:
Technical Specifications:

Test Connectors:
Twisted-pair: UTP, FTP
Coax: F-connector for 75 Ω, 50 Ω, 93 Ω cables

MicroMapper™ Pro main unit: RJ45 jack
Remote Identifier: RJ 45 jack
Pairs tested 1-2, 3-6, 4-5, 7-8, and shield

LED Display:
Horizontal: 5 Green LEDs
Pairs and shield display
(1 - 2, 3 - 6, 4 - 5, 7 - 8, and SHIELD)
Vertical: 6 Red LEDs
(TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY)

Cables test limit:
Minimum: 15.75" (40cm);
Maximum: 656’ (200 m)

Wiremap to TIA-568A/B standards:
Length (350 m or 999 ft)

Power:
IEC 86-1 (1996-07) --- Primary Batteries - General
IEC 60086-2 (1997-07) --- Primary Batteries - 

Specification Sheets:

MicroMapper™ Pro:
Requires four 1.5 Power Source
Battery type: 6 AAA alkaline batteries
IEC: LR03; Others: AAA, E92, 4003; JIS: AM 4; ANSI: 24A; 1.5 Volt (nominal)

Remote Identifier: No battery required

Dimensions:
MicroMapper™ Pro: 4.92" x 2.05" x 1.54" 1
125 mm x 52 mm x 39 mm
Remote Identifier: 1.87" x 1.12" x 0.87"
47mm x 28mm x 22mm

Weight:
MicroMapper™ Pro with Remote Identifier: 125 g
Weight .60 lbs (.27 kg)

Tone Generator:
Analog tones: [400Hz, 1 KHz]

Warranty: One year

Author: Adrian Young

Creation Date: 2014-02-26

Last Modified: 2014-02-26

 
 
 
 
Powered By OneLink