Cannot connect to LinkWare PC | www.flukenetworks.com

Base de conhecimento

KB Home   >  Teste de cobre   >  LinkWare™ PC 9.x

Cannot connect to LinkWare PC

If you have checked your connections and still cannot connect your Versiv/TFS main frame to LinkWare PC, please ensure you do not have a VPN session/connection open and that you are running the latest version of LinkWare PC. It is possible that the USBLAN driver has not been installed for the USB Port you are connected to on your PC. If this is the case, we just need to force Windows to install it for you - manually. Do not be intimidated, this is quite a simple process.
 
Windows 7 users
  • Click on the start icon in the lower left of your screen
  • Select Devices and Printers to see:

  • Right click USBLAN and select troubleshoot, wait to see:


     
  • Click on Apply this fix
  • Your Versiv/TFS should now be able to talk to LinkWare PC.

 

Windows 8 users

  • Click on the search icon in the upper right and enter Devices and Printers


     
  • Click on Devices and Printers to give:


     
  • Right click USBLAN and select troubleshoot, wait to see:


     
  • Click on Apply this fix

Your Versiv/TFS should now be able to talk to LinkWare PC.


Windows 10 Users

If all drivers are up to date and you still get an error when trying to connect, check the Network Settings within the USBLAN adapter.

From Control Panel, right-click on the Fluke USBLAN adapter and to to Network settings.

 

 

In Network Settings, click Change adapter settings

 

 

Right click on the FlukeUSBLAN adapter and go to Properties

 

 

In Properties, make sure review which protocols are checked. This will vary depending on what is installed on your PC. At a mnimum the top 3 shown below must be checked. If you have any unchecked boxes, try checking them, click OK, and then restart LinkWare PC and try connecting Versiv again.

 

 

Author: Adrian Young

Creation Date: 2015-06-22

Last Modified: 2015-06-22

 
 
 
 
Powered By OneLink