|The SimpliFiber Source can communicate the selected wavelength to the DTX-FOM (Fiber Optic Meter). |
With AUTO selected (shown right), the SimpliFIber Source can communicate the selected Wavelength to the DTX-FOM. This is also true for the SimpliFiber Meters.
When testing, the user does not have to select the wavelength being tested in the DTX CableAnalyzer, this is done automatically.
The advantage here is that there is one less step to the testing process eliminating potential errors in setup and testing.
If the CW/2kHz is either on or flashing, press the AUTO key once to enable AUTO mode. The DTX-FOM will not be able to make a measurement if this is selected.