Permanent Link Test Standards Definition - DSX CableAnalyzer | Fluke Networks

Base de conhecimento

KB Home   >  Teste de cobre   >  DSX CableAnalyzer™ Series

Permanent Link definition - DSX CableAnalyzer

Often used by installers to prove the fixed portion of the cabling system (excluding user cords) meets the requirements of ANSI/TIA-568-C.2 or ISO/IEC 11801:2011. The cabling vendor offering the warranty will require this. If you see an installer making these measurements using Channel Adapters, you may wish to stop them and ask why they are not making Permanent Link measurements.

The measurement includes the RJ45 plug at the end of the test lead, but does not include the cable portion of the test lead or connection to the test equipment. In the case of the DSX-PLA004 Permanent Link adapter, it is the only Permanent Link adapter in the industry where the RJ45 plug is guaranteed to meet the NEXT, FEXT and Return Loss requirements of the above standards. The cable portion of the test lead is removed from the measurement using calibration constants stored in the adapter.
 
 
            DSX CableAnalyzer Three Connector Channel
 
 
 
 
            DSX CableAnalyzer Two Connector Channel
 
 
 
 
            DSX CableAnalyzer Data Center Channel

Author: Adrian Young

Data de criação: 19-2-2014

Última alteração: 19-2-2014

 
 
 
 
Powered By OneLink